XOXO 2.0 hangers from Colorado Skate Hardware Co. 3 inch truck hangers kit 

( sold in a set of 4 ) 

 New!!  We have added the Kissy Fit Kit to the XOXO 2.0 ( three sizes of bottom cushions to help you get the correct truck height ) 

XOXO

Kit contains: 4 trucks, 4 soft rubber pivot cups, 4 mini pivot cups, three heights if bottom cushions.  

__________________________________________________________________

The XOXO is a retro fit truck kit that will fit some but not all 10 to 12 degree roller skate plates. Because of the endless slider block, plate, cushion combinations it will be up to the installer to test fit the trucks before skating.

_________________________________________________________

Depending on your plate setup you may need to use different pivot cups and/or shorter cushions. The included cushions and pivot cups may be used if needed.

_______________________________________________________

Install notes on tested Plates.  

Avanti plates – good fit, will need to change the pivot cups to the soft rubber cups. May need shorter cushions if used with slide blocks. 

Sunlite plates - good fit with pivot cup change to the mini pivot cups. May need shorter cushions if using slide blocks.  We are getting reports that the Sunlite plates may not be strong enough to support the wide trucks and added abuse from park / aggressive  roller skating.  Also we are finding that the Sunlite plate angle does not 100% match the xoxo truck angle.  We would recommend the Avanti plates over the Sunlite plates for use of the XOXO trucks.    

Marvel (Beach bunny) plates – good fit with pivot cup change to mini pivot cups. It may be helpful to remove the silver spacer from under the cushions on some setups. May need shorter cushions if using slide blocks.